This is a 3S lithium-polymer battery with a nominal voltage of 11.1V and a capacity of 450mAh. It comes in a compact, lightweight soft case. That suits compatible micro RC aircraft, helicopters, drones and other small models that use a three-cell battery with a JST connector and have limited battery-compartment space.
It has a 30C continuous discharge rating and a 60C burst rating. The burst rating provides extra output during short periods of higher demand, such as takeoff, acceleration and climbing. A factory-installed JST connector means no soldering or plug change is needed in compatible models. It can replace an older pack or serve as an extra battery.
Before installing, confirm your model's required voltage, connector type, connector polarity, recommended battery capacity and available compartment space. Charge only with a LiPo-compatible balance charger set to 3S.
- Battery type
- Lithium Polymer (LiPo)
- Construction
- Soft case
- Cell count
- 3S (3-cell)
- Nominal voltage
- 11.1V
- Full charge
- 12.6V
- Capacity
- 450mAh
- Discharge rating
- 30C continuous, 60C burst
- Connector
- JST (factory installed)
- Charging
- LiPo-compatible balance charger, 3S settings
- Compatibility
- Micro RC aircraft, helicopters and drones that need a 3S 11.1V 450mAh LiPo with a matching JST connector, polarity and dimensions
- In the box
- 1 Powerhobby 3S 450mAh 30C LiPo battery with JST connector
- Part number
- PH 3S 450mAh 30C