
Preservac Teflon Heat Strip
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $4.00 at Food Vacuum Sealers Australia (checked Nov 21, 2026).

Prices are checked against each store and labelled with when.
A replacement Teflon strip that covers the heating element on a Preservac vacuum sealer's seal bar. It gives the element a non-stick surface so bags release cleanly and seals stay even. It is a wear part: once the strip is burnt, wrinkled or torn, seals weaken and air creeps back into the bag. Buyers pick the strip by sealer model, since widths and lengths differ across the range.
In stockShips from Australia · duties may applyReturn policy
Preservac Teflon Heat Strip is a replacement strip for a vacuum sealer's seal bar. It covers the heating element and provides a non-stick surface during sealing. A worn, burnt, or damaged strip can affect seal quality and allow air back into the bag.
To install, unplug the vacuum sealer and let the seal bar cool completely. Peel off the old strip without disturbing or damaging the heating wire, then clean and dry the area. Cut the new strip to the required length, remove the backing, and apply it smoothly over the heating wire. Run a finger along the strip to check that it is secure and free from bumps or wrinkles.
To check a seal, use a good-quality vacuum sealer bag or roll and hold the finished seal up to the light. The seal should appear clear and even across its width. If the same imperfection appears in the same position on two seals, inspect the Teflon strip for wear or damage.
It checks today's price at every store, compares the alternatives and answers in about a minute.


