Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Prusa CORE One+ (Gen 2) Kit with the INDX system is a self-assembly, fully enclosed CoreXY FDM printer built around a four-tool passive toolchanger. Each tool has its own nozzle and filament path, so multi-color and multi-material prints swap in about 12 seconds with roughly 0.013 g of purge waste instead of a large wipe tower. An induction-heated Smart Head warms only the active nozzle while parked tools stay cold, which limits oozing and cross-contamination. It suits hobbyists and small shops that want enclosed, low-waste multimaterial printing and are willing to build the machine themselves; it competes with other enclosed toolchanger kits on waste and expandability rather than on plug-and-play setup.
In stock
Lowest price we've seen: $1,799.00 on Nov 17 at Swing Design. Tracked across 1 store since Nov 17.
The Prusa CORE One+ (Gen 2) with INDX Assembly Kit is a self-assembly 3D printer that pairs a fully enclosed CoreXY platform with a four-tool passive toolchanger. Each of the four tools has its own nozzle and filament path, so multi-color and multi-material models print with little waste. With the INDX system installed, the build volume is 248 × 205 × 270 mm.
The Smart Head uses an induction coil to heat only the nozzle in use, while parked tools stay cold to limit oozing and contamination between materials. A tool change takes about 12 seconds and leaves roughly 0.013 g of purge waste. The system can be expanded to eight tools later without replacing the Smart Head.
The enclosed chamber has active ventilation and reaches up to 55 °C, and the printer uses GT1.5 belts, Input Shaper and Phase Stepping for high-speed movement. The Nextruder direct-drive extruder pairs a Load Cell sensor with 360° cooling for automatic first-layer calibration and clean overhangs, and bed leveling is automatic. The tools take up to 300 °C at the nozzle and run standard 1.75 mm filament, with more than 200 factory-tuned material profiles in PrusaSlicer. It works with PrusaSlicer, Prusa Connect and the Prusa App, and receives lifetime firmware updates.






