Prusa XL+ 5-Toolhead 3D Printer

Original Prusa XL+ Five-Toolhead (Extruder) 3D Printer | 360×360×360 mm Large Format, Optional Enclosure

Print the whole part — not the puzzle. The Original Prusa XL+ Five-Toolhead is the full Prusa large-format toolchanger platform. You get a full 360 × 360 × 360 mm cubic build volume — about 46.7 liters, roughly 3× a CORE One+ and 1.5× a CORE One L+ — so props, jigs, architectural models, cosplay armor, fixtures, and production parts come off the bed as one piece instead of a glue-up. Five independent Nextruders stay loaded and ready, so you can run five materials, five colors, or five nozzle sizes in one job with automatic tool changes and virtually no purge waste.

This is the second-generation XL. Compared with the original Prusa XL, the XL+ prints about 10–15% faster, uses new 1.5 mm GT belts, adds a nozzle wiper, improves toolhead and electronics cooling, and ships with fully automatic tool-offset calibration via a dedicated electronic sensor. All five docks are populated from day one: this is the configuration Prusa uses for multi-material production work.

Key specifications

• Build volume: 360 × 360 × 360 mm (46.7 L)

• Architecture: CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping

• Extruder: Five Nextruder direct drive

• Max nozzle / bed: 290 °C / 120 °C (16-tile segmented bed)

• Chamber (optional): ~50 °C with Enclosure for Prusa XL+; ~60 °C with upcoming heater

• Toolheads: 5 independent toolheads with automatic tool changing

• Calibration: LoadCell first layer; electronic tool-offset sensor

• Print surface: Removable double-sided satin sheet