The R75 is a 1400W plunge router with a 1/2-inch collet, built to stay light at about 3.4kg so it is easier to control freehand and to use on doors and frames in place. Its 12,000–28,000rpm variable-speed motor holds speed under load, and a six-level dial with an LCD readout sets the speed for the bit and material. Soft start, twin LED lights at the collet, an offset handle layout and a 55mm plunge stroke round out the feature set. It suits woodworkers who want a full-size 1/2-inch router without the weight of heavier fixed-speed machines.
In stockReturn policy
Owners rate it well, at 4.6 out of 5 from 16 ratings, and the light weight and smooth, controlled start come up as its strengths.
The R75 is a 1/2" plunge router built to keep weight down without giving up power or precision. It weighs 3.4 kg, and its asymmetrical handles distribute the weight for control and balance. The lower weight reduces operator fatigue when edge profiling or routing hinge and lock recesses, including on wooden doors or frames in place.
The 1400 W high-torque motor runs at 12,000 to 28,000 rpm and holds a constant speed under load. A six-level speed dial with a digital LCD readout sets the speed to suit the bit, material and application. Soft start brings the motor up to speed gradually to reduce shock on start-up. Two LED lights on either side of the collet light the workpiece at the point of cut.
The soft grip main handle has a handle-mounted power switch and a safety lock that prevents accidental start-up. The secondary handle also rotates to lock the router at a fixed height anywhere in the 55 mm plunge stroke. Depth is set with a stopper pole marked in metric graduations. A 3-turret depth stop pre-sets up to three cut depths for incremental passes.
