
Raspberry Pi CM5 (Compute Module 5)
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Compute Module 5 puts the Raspberry Pi 5's BCM2712 quad-core Cortex-A76 at 2.4 GHz onto a 55 x 40 mm board with a 4-pin connector for custom carrier boards. It roughly doubles CM4 CPU performance, adds two USB 3.0 interfaces, and offers LPDDR4-4267 with ECC in 2, 4, 8 or 16 GB plus eMMC in 0, 16, 32 or 64 GB. It is built for product designers and industrial integrators who need Pi 5 power in an embedded form factor, not for plug-and-play desktop buyers. Against the CM4 it is a clear step up in CPU, USB and eMMC speed, but it needs a CM5-compatible carrier board and cooling.
In stockShips from Germany · priced in EUR (€73.47) · duties may applyReturn policy
Owners and integrators treat the CM5 as a straightforward CM4 upgrade with real CPU and USB gains. Most complaints center on carrier-board compatibility and thermals rather than the module itself.
The Raspberry Pi Compute Module 5 (CM5) brings the performance of the Raspberry Pi 5 to the Compute Module family. It is built around the Broadcom BCM2712, a quad-core Cortex-A76 (ARMv8) 64-bit SoC running at 2.4 GHz. CPU performance is approximately double that of the CM4.
The module measures 55 mm × 40 mm × 4.7 mm and has 4 × M2.5 mounting holes. It offers several RAM and eMMC storage options, plus an optional certified wireless radio module. Maximum eMMC bandwidth is 400 MBps, four times faster than previous Compute Modules.
It has 2 × HDMI 2.0 outputs, two 4-lane MIPI ports for displays or cameras, PCIe, USB 2.0 and USB 3.0, Gigabit Ethernet and up to 30 GPIO pins. It runs from a single +5V supply.