This is a square, rechargeable ceiling light with a built-in PIR motion sensor. It has a white ABS and PC casing and two small buttons on the side. It uses 386 LED beads and produces 210 lumens. Its detection angle is 120° and its detection distance is 32.8 ft.
The light has three working modes: constant on, Night Sensing Mode (turns on in low light), and Daytime Sensing Mode (turns on whenever motion is detected). It has three color temperatures (6500K cold white, 3000K warm yellow and 4500K neutral) and 10 brightness levels. Three timer settings (15, 30 and 60 minutes) are available. You can control color, brightness and mode with the included remote or the buttons on the light.
A built-in 4000mAh battery charges through Type-C. About 3 hours of charging gives 7 to 10 hours of continuous lighting, depending on use. The light can be mounted with magnets, screws or adhesive tape. It can be used in places such as a hallway, closet, pantry, bathroom, stairway, basement, bedroom, porch or shed.
- Product type
- Motion sensor ceiling light
- Material
- ABS, PC
- Color
- White
- Input
- 5V/1A, Type-C
- Power
- 3.5W
- LED beads
- 386
- Brightness
- 210 lumens, 10 levels
- Color temperatures
- 6500K cold white, 3000K warm yellow, 4500K neutral
- Modes
- Constant on, Night Sensing, Daytime Sensing
- Timer
- 15, 30 or 60 minutes
- Detection
- 120° angle, 32.8 ft distance
- Battery
- Built-in 4000mAh rechargeable
- Runtime
- 7-10 hours, based on actual use
- Charging time
- About 3 hours
- Remote battery
- 1 x CR2025 (included)
- Mounting
- Magnetic, screws or adhesive tape
- In the box
- Ceiling light, remote control, USB charging cable, CR2025 battery, mounting accessories
