This is a hands-free holder that sets a smartphone on the car's instrument panel and reflects its navigation screen onto a tinted panel. The base sits on a black non-slip mat, and the panel is fixed to the back of the base by a hinged bracket that tilts up to the angle you set.
The panel is made of hardened organic glass, which resists scratches. A transparent reflection film applied to the inside of the glass reflects the phone's screen by optical reflection, so the route shows on the panel at eye level instead of down in the center console. With the panel raised it does not block the view of the road.
Most navigation apps have a reflection mode. Set the route, open the mode, place the phone on the holder and tilt the glass to your viewing angle; 45 degrees is the recommended angle. Setup runs in a few steps: stick the mat in place, apply the reflection film, peel off the protective layers, then set the phone and the angle.
- Type
- Universal smartphone hands-free navigation display holder
- Material
- Hardened organic glass panel
- Dimensions
- 5.91 x 3.74 x 0.79 in (15 x 9.5 x 2 cm)
- Package dimensions
- 7.09 x 5.51 x 1.57 in (18 x 14 x 4 cm)
- Weight
- 0.298 kg package weight
- Shipping weight
- 287 g
- Viewing angle
- 45 degrees recommended
- Mounting
- Hinged bracket with tilting panel; black non-slip mat
- In the box
- 1 x Universal Smartphone Holder, 1 x Transparent Reflection Film, 1 x Black Non-slip Mat, 1 x Clean Cloth, 1 x English User Manual