Compared across 4 stores. Prices are checked against each store and labelled with when.
The Rikon 70-105 is a benchtop wood lathe with a 10-inch swing over the bed and 18 inches between centers. It uses a 1/2 HP TEFC motor with five fixed speeds from 500 to 3,200 RPM, changed by moving the belt, and a 1-inch by 8 TPI spindle with MT2 tapers at both ends. It suits new turners and pen makers who want a compact lathe with standard spindle threads and tapers that take common chucks and accessories. Against variable-speed minis it gives up easy speed changes and low-end torque, but it is heavier-built than the smallest hobby lathes and takes standard tooling.
In stock
In stock
In stock
In stock
Lowest price we've seen: $339.99 on Nov 17 at Acme Tools. Tracked across 4 stores since Nov 17.
Owners rate it around 4.2 out of 5 and generally see it as a solid, simple entry lathe. They like the standard spindle and tapers and the stable, heavy build for the size, and most complaints center on the manual belt changes and limited power.
The Rikon 70-105 is a benchtop mini lathe for woodturning. It has 18 inches between centers and 10 inches of swing over the bed. Swing over the cross slide is 7-1/2 inches over the tool rest.
A 1/2 HP TEFC motor runs on 120V, 3.7A, 60 Hz power at 1,700 RPM. The speed control is analog and not variable, with a speed range of 500, 1,175, 1,850, 2,225, and 3,200 RPM.
The headstock spindle is 1 inch x 8 TPI with an MT2 taper, and the tailstock has an MT2 taper. The tool rest post diameter is 5/8 inch. The lathe is 35-1/2 inches long and weighs 75 pounds net. It is intended for pen turning and for new turners.
It checks today's price at every store, compares the alternatives and answers in about a minute.




