Prices are checked against each store and labelled with when.
Ask our shopping agent
Quick answers
Where is the Rip-Flip Fence Stop System cheapest?
At Woodpeckers, for $249.99, as of our latest check.
What do buyers say about the Rip-Flip Fence Stop System?
Buyers like: Delivers repeatably accurate results; Flip stops get out of the way when not in use and return to work easily; Micro-adjusting and locking are quick and accurate.
Adds repeatable flip-stop accuracy to your table saw rip fence
Flip the stop up, slide the fence to the brass tip and lock for repeatable cuts
Large knurled brass knob and locking thumbwheel for quick, accurate micro-adjusting
Symmetrical stops can contact the left or right side of the fence and flip sides in seconds
Couple two stops together to dial in perfect-fitting dadoes with two cuts
Coupled stops can be repositioned along the rail while keeping the same dado width
Sizes
SawStop Version - 36 Inc, SawStop Version - 52 Inc, Powermatic/Biesemeyer Ve
Materials
Anodized aluminum track; brass tip and knurled brass knob on the stops
Sizing
SawStop version comes in sizes to match 36" and 52" T-Glide fences; Powermatic/Biesemeyer version is available in 30" and 50" sizes. If your fence clamps to a 2
Guarantee
Woodpeckers limited warranty: materials and workmanship are guaranteed for the life of your tool.
Returns
If you are dissatisfied for any reason, return the tool within 30 days of purchase for your money back.
Shipping
Free shipping on this item; buy now and get free shipping on the entire order.
Packs
Flip Stops and Coupling Pins are available separately, and a pair of Flip Stops complete with a Coupling Pin is offered as a bundle.
In the box
Mounting brackets and hardware, Anodized aluminum track (two pieces of Rip-Flip track), Two Rip-Flip Stops, One dado Coupling Pin, Powermatic/Biesemeyer version also includes all adapters and brackets for T-Square style fences
About the Rip-Flip Fence Stop System
Woodpeckers Rip-Flip Fence Stop System
To use a Rip-Flip Stop , just flip it up, slide the fence until it contacts the brass tip of the stop and lock your fence. It’s that easy. The large knurled brass knob and locking thumbwheel make micro-adjusting and locking quick and accurate. The stops are symmetrical, so they can be set up to contact the left side of the fence or the right, the choice is yours and it takes just seconds to flip a stop from one side to the other.
We weren’t satisfied with just adding flip-stop convenience and precision to the rip fence. We took it to the next level by coupling two stops together to produce perfect fitting dadoes. Stop hassling with repeated trial-and-error attempts to get just the right combination of chippers and shims. Simply assemble your dado stack to at least half the width of your finished dado. Then, with a few turns of the micro-adjuster you can fine tune a perfect fitting dado by making two cuts; one against each stop.
We’re not done. Now that you have the dado dialed in for a perfect fit, the coupled stops can be repositioned anywhere along the rail and the dado will remain exactly the same without ever readjusting anything. Think about fitting multiple shelves in a cabinet. Just slide the fence and the coupled pair of stops to wherever you want a shelf and the dado width is perfect and automatic.
The Rip-Flip for SawStop fits all SawStop Contractor, Professional and Industrial table saws equipped with their unique “T-Glide” fence. Integrating the Rip-Flip System with your table saw takes just a few minutes. It won’t affect the alignment of your rip fence rail and doesn’t require removing any original parts. Once the track is installed, you can position the Rip-Flip Stops anywhere along the rail, in any combination of right, left or coupled stops.
The Rip-Flip Fence Stop System comes in sizes to match the 36” and 52” SawStop T-Glide fences. All Rip-Flip systems come with mounting brackets and hardware, anodized aluminum track, two Rip-Flip Stops and one dado Coupling Pin. Flip Stops and Coupling Pins are available separately and we offer a pair of Flip Stops complete with a Coupling Pin as a bundle.
The Rip-Flip for Powermatic/Biesemeyer fits new and old versions of the Powermatic “Accu-Fence”, new and old versions of the Biesemeyer T-Square Fence and most “clones” of the Biesemeyer. If your table saw fence clamps to a 2" x 3" rectangular tube, the Rip-Flip will more than likely fit. We’ve looked at dozens of different T-Square style fences and have come up with adapters and brackets that will work with the vast majority of them. We’ve included all the pieces and parts into the Powermatic/Biesemeyer version of the Rip-Flip. Integrating the Rip-Flip System with your table saw takes just a few minutes. It won’t affect the alignment of your rip fence rail and doesn’t require removing any original parts. Once the track is installed, you can position the Rip-Flip Stops anywhere along the rail, in any combination of right, left or coupled stops.
The Powermatic/Biesemeyer Rip-Flip Fence Stop System is available in 30” and 50” sizes. It includes all the adapters and brackets to make the fence work with almost all T-Square style fences, anodized aluminum track, two Rip-Flip Stops and one dado Coupling Pin. Flip Stops and Coupling Pins are available separately and we offer a pair of Flip Stops complete with a Coupling Pin as a bundle.
Like all Woodpeckers products, the Rip-Flip Fence Stop System is precisely machined and carefully inspected in our Strongsville, Ohio manufacturing facility (just south of Cleveland).
NOTE: The “SawStop”, “T-Glide”, “Powermatic” “Accu-Fence” and “Biesemeyer” brand names are the registered trademark of their respective companies and are not associated with Woodpeckers, LLC.
Protected by US PATENT NO. D1,008,777 11,345,057 & 12,390,950.
Rip Flip FAQ Updates
**Please Note: The SawStop Rip Flip is only compatible with the T-Glide fence system that has been installed on the ICS (Industrial), PCS (Professional) or CNS (Contractor) saws. It will not function on the Jobsite Saw and will not work with the original premium fence or the extruded aluminum fence on the CNS.
FAQ:
Q: Will the Rip Flip work with a SawStop sliding table?
A: Yes. The rip flip track will hang off the right end of the fence rail. This can be cut to fit or left as is.
Q: Is this compatible with the Saw Stop Jobsite Pro?
A: No. It is not compatible with the Jobsite Pro.
Q: Is this compatible with the Wixey digital readout system?
A: No. It is not compatible because the Wixey shares the same mounting space as the Rip Flip.
Q: What is included in the Rip Flip Set?
A: Two pieces of Rip Flip track, 2 Stops, 1 coupler and all of the mounting hardware are included with the set.
Q: Does the Dado kit come with the Rip Flip?
A: The two stops that come with the kit can be connected with the included coupler to assemble the dado kit. The Dado Kit is an extra option to add more capabilities to the Rip Flip System. If you remove the
What buyers say
Buyers like
Delivers repeatably accurate results
Flip stops get out of the way when not in use and return to work easily
Micro-adjusting and locking are quick and accurate
Symmetrical stops switch from left to right side in seconds
Coupled stops produce perfect-fitting dadoes without trial-and-error
Installs in minutes without removing original parts
