Versa-Fence Face Upgrade for SawStop Table Saws

Woodpeckers Versa-Fence - A Fence Face Upgrade for SawStop Table Saws.

Note: Compatible with JessEm Clear-Cut Stock Guides (sold separately)

Versa-Fence attaches to the rectangular tube of the T-Glide with tool-free, stainless steel knobs. A powder coated steel bracket mounts to the outside of the fence to distribute the pressure from the knobs. Just loosen the knobs slightly to adjust the Versa-Fence to provide more support on the infeed or outfeed side. For those rare times when you want the rip fence on the left side of the blade, it takes about a minute to swap the Versa-Fence and the steel bracket.

If you've been eyeing the JessEm Clear-Cut Stock Guides but are concerned about drilling your fence tube, Versa-Fence is the answer you've been looking for. In addition to adding a straighter, longer and smoother fence face, Versa-Fence adds a track perfect for the Clear-Cut Stock Guides. And it adds that with no drilling or modification of any kind. If you ever sell your saw or upgrade to a larger model and want to keep your Versa-Fence and Clear-Cut system, you can put your fence back to factory design in just a couple minutes.

If you prefer traditional featherboards , we have an optional bracket to mount Woodpeckers Variable Pressure Featherboards to the top track. And if you're constantly hunting for your tape, pencil, rule and push stick you can solve the problem with the optional accessory tray that mounts via the Versa-Fence knobs.

There are three versions of the Versa-Fence. We make a 48" Versa-Fence to fit the 41-1/2" T-Glide found on the SawStop ICS. And we offer both a 36" and 48" Versa-Fence to fit the 35" T-Glide found on the SawStop PCS. Those two will also fit the optional T-Glide for the SawStop CNS.