Roomie IR100W Wi-Fi IR Adapter

Control any infrared device wirelessly from your iPhone, iPad, or Mac with the Roomie IR100W. This compact IR adapter connects to your home Wi-Fi 6 network and uses Bluetooth 5.3 LE for seamless device pairing. Includes a Proximity Beacon for automatic room detection, 3M VHB fastener for easy mounting, and a quick-start card. The 110W model includes an infrared learner for programming custom IR codes. Works with the Roomie Remote app. Backed by a 1-year warranty.

Roomie IR100 connects any number of iOS or macOS devices to any number of infrared devices. Roomie IR100 works directly via your Wi-Fi and does not require any additional hubs or adapters or emitter cables.

Roomie IR100 adapters are supported by Roomie Remote X and Roomie Remote 9.2.4 and above, and also provide an open network API. Firmware updates are managed by Roomie Remote X.

This model provides Wi-Fi 6 support compatible with modern Wi-Fi making it easy to get on your network.

Every Roomie IR100 adapter also doubles as a Proximity Beacon: using its built-in Bluetooth Low Energy radio, Roomie Remote can sense which room your iPhone or iPad is in and automatically switch you to that room as you move through your home. Proximity Beacon support requires Roomie Remote 10.4 or later on iOS or iPadOS and is not available on macOS.

Roomie Remote includes hundreds of thousands of infrared codes for virtually all devices with over 15 years of experience refining rock-solid codes, and also supports adding codes via the Custom Devices feature. After adding the adapter to your network and positioning the adapter in line or sight or adjacent to the target device, add the device in Roomie Remote.

On models with the built-in Infrared Learner, you can also teach the adapter directly: point an original remote at the adapter and Roomie Remote captures the code from its 38 kHz infrared receiver, so devices outside the database can be added without leaving the app.

Technical Specifications

Dimensions 57 × 22 × 17 mm (2.24 × 0.87 × 0.67 in)

Weight 16 g (0.56 oz)

Wireless Wi-Fi 6 (802.11ax) – 2.4 GHz only (5 GHz not supported)

Bluetooth Bluetooth 5.3 LE – powers the Proximity Beacon feature; requires Roomie Remote 10.4+ on iOS/iPadOS (not macOS)

Processor ESP32-C6 (RISC-V single-core 160 MHz, 512 KB SRAM, 4 MB Flash)

Infrared Transmitter High-Power IR LED Emitter (950 nm) – up to 10 m (33 ft) range forward and upwards. IR emits in both directions.

Infrared Learner 38 kHz demodulating IR receiver (940 nm), built in on 110W model only. Learns codes directly from an original remote. Tuned to the 38 kHz carrier used by most consumer remotes; nearby carriers (roughly 36–40 kHz, covering common NEC, Philips, and Sony remotes) learn reliably at close range. Remotes on distant carriers — 56 kHz, or Bang & Olufsen's 455 kHz — are not supported.