The Roomie IR100WA is a Wi-Fi infrared adapter that connects iOS and macOS devices to infrared-controlled devices. It works directly over your Wi-Fi and needs no additional hubs, adapters or emitter cables. It is supported by Roomie Remote X and Roomie Remote 9.2.4 and above, and it provides an open network API.
The adapter uses Wi-Fi 6 (802.11ax) on 2.4 GHz only; 5 GHz is not supported. A 2.4 GHz 2 dBi omni-directional antenna is included and can be removed if you don't need it. A high-power 950 nm IR LED emitter reaches up to 10 m (33 ft) forward or upwards and emits in both directions. Firmware updates are managed by Roomie Remote X.
Its built-in Bluetooth 5.3 LE radio also makes it a Proximity Beacon, so Roomie Remote can sense which room your iPhone or iPad is in and switch to that room as you move through the house. Proximity Beacon requires Roomie Remote 10.4 or later on iOS or iPadOS and is not available on macOS. To set it up, add the adapter to your network, position it in line of sight of or adjacent to the target device, and add the device in Roomie Remote. Roomie Remote includes hundreds of thousands of infrared codes, and codes can also be added with the Custom Devices feature.
- Dimensions
- 57 × 25 × 24 mm (2.24 × 0.98 × 0.94 in)
- Weight
- 32 g (1.13 oz)
- Wireless
- Wi-Fi 6 (802.11ax), 2.4 GHz only; 5 GHz not supported
- Antenna
- 2.4 GHz 2 dBi omni-directional, removable
- Bluetooth
- Bluetooth 5.3 LE
- Processor
- ESP32-C6, RISC-V single-core 160 MHz, 512 KB SRAM, 4 MB flash
- Infrared
- High-power 950 nm IR LED emitter; up to 10 m (33 ft) forward or upwards; emits in both directions
- Power
- 5 V ⎓ 500 mA via USB-C; 180 mA typical active, under 80 mA idle
- Not included
- Power adapter and USB-C cable
- Enclosure
- PETG, royal blue; heat resistant to 80 °C (176 °F) continuous, 100 °C (212 °F) short-term
- Mounting
- 3M VHB adhesive pad with hook and loop removal
- Operating temperature
- 0 °C to 60 °C (32 °F to 140 °F)
- Certifications
- FCC (ID Z4T-XIAOESP32C6), CE-RED, RoHS
- Compatibility
- iOS and macOS; Roomie Remote X and Roomie Remote 9.2.4 and above; open network API
- Proximity Beacon
- Requires Roomie Remote 10.4 or later on iOS or iPadOS; not available on macOS
- Assembled
- In USA
- In the box
- IR100WA adapter, 2.4 GHz Wi-Fi antenna, 3M VHB resealable hook and loop fastener, QuickStart card
- Warranty
- 1-year limited, covering manufacturing defects