It checks today's price at every store, compares the alternatives and answers in about a minute.
The RPS Core Series 13RPS15 is a 1.5 HP, 220V three-wire submersible well pump kit with a 4-inch pump end and a starter box that wires straight to a breaker or switch. It is rated to 200 feet of total head and moves roughly 16 to 21 GPM depending on lift, with a 304 stainless steel body and composite impellers for continuous duty. It is NSF Drinking Water Certified and UL Listed. It suits farm, ranch and homestead wells, irrigation and tank or pond pumping, and owners report straightforward DIY installs and flow that matches the published curve.
In stock
Lowest price we've seen: $1,169.99 on Nov 10 at RPS Water Pumps; highest $1,309.99 on Nov 2. Tracked across 1 store since Nov 2.
Owners rate it highly and mostly describe clean, steady flow, solid build and an install that starts on first power-up. Complaints center on kit completeness and a handful of early failures.
The RPS Core Series 13RPS15 is a submersible pump kit for pumping water from wells, tanks, or ponds. It is used in household wells, agricultural operations, irrigation systems, and industrial settings. It is rated up to 200 feet of total head and built for continuous duty.
The outer body is 304 stainless steel, and the impellers are engineered composite. The motor housing is 100% stainless steel and laser welded. The stator is hermetically sealed, and the motor has a pressure equalizing diaphragm and a removable wire connector. The pump is NSF Drinking Water Certified and UL Listed.
The kit has a 1.5 HP, 220V, 3-wire single phase motor and a starter box. The starter box wires directly to a breaker or switch. The 4" pump end fits well casings 4 inches wide and larger. To size the pump for a pressure tank system, add the well depth to the tank pressure expressed in feet of head. If the total head exceeds this pump's range, choose a larger pump for similar flow at higher head.
