
SawStop 3HP Industrial Cabinet with 36-Inch Industrial T-glide Fence System
Last price we saw
Prices change often: ask the agent below to check today's price at every store.
Prices are checked against each store and labelled with when.
Check today's price at Msc Industrial SupplyAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Price facts
- Last seen at $6,016.44 at Msc Industrial Supply on Nov 10.
Our take on the SawStop 3HP Industrial Cabinet with 36-Inch Industrial T-glide Fence System
The SawStop 3HP Industrial Cabinet Saw is a 10-inch cabinet saw built around SawStop's patented injury-mitigation system, which detects contact with the blade and retracts it in milliseconds. It runs a 3 HP single-phase 230V motor at 4000 RPM, cuts 3-1/8 inches deep at 90 degrees and 2-1/4 inches at 45, and bevels to 45 degrees left. The 36-inch Industrial T-Glide fence gives it serious rip capacity for a home or small shop. Against conventional cabinet saws from Delta, Powermatic and Grizzly, it gives up nothing in cut quality and adds a safety feature no rival matches, though the brake cartridges and occasional false trips add running cost and fuss. It suits serious hobbyists and small professional shops that want full cabinet-saw performance with a safety net.
- Patented brake stops and retracts the blade on contact
- 3 HP motor handles thick hardwoods without bogging
- 36-inch T-Glide fence gives generous rip capacity
- 3-1/8-inch depth of cut at 90 degrees
SawStop 3HP Industrial Cabinet with 36-Inch Industrial T-glide Fence System prices at every store
- Msc Industrial SupplyNew
Out of stock
$6,016.44+ $402.99 shippingChecked Nov 9
Store links may earn us a commission. Price via Klarna.
SawStop 3HP Industrial Cabinet with 36-Inch Industrial T-glide Fence System price history
Lowest price we've seen: $6,016.44 on Nov 9 at Msc Industrial Supply. Tracked across 1 store since Nov 9.
What reviewers say
Owners rate the saw highly for its build, fence accuracy and the peace of mind the brake brings. Most complaints center on brake cartridge cost and occasional false trips, not on cut quality.
- Safety brakePraisedOwners say the retracting brake is the reason they bought the saw and trust it around family or employees.
- Fence accuracyPraisedThe T-Glide fence is described as staying square and locking down repeatably.
- Cartridge costCriticisedBuyers complain that replacement brake cartridges are a recurring expense.
Questions and answers
- How does the SawStop brake work?
- A cartridge senses contact with the blade and fires an aluminum block into the teeth, stopping and retracting the blade in milliseconds. The blade and cartridge are consumed in the process.
- Can I use a dado stack on this saw?
- Yes, but you need the dedicated dado brake cartridge and must set the saw to the correct mode. Standard blades use the standard cartridge.
- What power does it need?
- It runs on single-phase 230V AC. You need a 230V circuit in your shop, not a standard 120V outlet.
- How deep will it cut?
- It cuts 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, enough for most furniture and cabinet work.
- How much rip capacity does the 36-inch fence give?
- The Industrial T-Glide fence rips up to 36 inches to the right of the blade, so you can handle wide panels and long stock.
- Why did my brake fire on good wood?
- Damp wood, conductive material or contact with metal can set it off. Let stock dry and check for staples or nails before cutting.














