SDR V2 Software Defined Radio Receiver with USB 2.0
Best price now
$50.55at WalmartChecked Nov 12
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The HTOOL RTL-SDR V2 is a USB software-defined radio receiver built on the RTL2832U chipset. It tunes roughly 22 MHz to 1.1 GHz, depending on the tuner, and works with free software like SDR#, GQRX and HDSDR on a PC or Android device. It is an inexpensive way into SDR for listening to FM/AM broadcasts, aviation ADS-B, amateur radio and spectrum analysis. It does not receive shortwave below 24 MHz; the RTL-SDR V4 is the model for full HF coverage.
In stockSold by HTOOLReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The SDR V2 is a software-defined radio receiver built on the RTL2832U chip. It covers 22 MHz to 1100 MHz, depending on the tuner version. It does not receive shortwave (HF) signals below 24 MHz because of hardware limitations.
It connects to a PC or an Android device over USB 2.0. Free software such as SDR#, GQRX or HDSDR decodes FM, AM, NFM, USB, LSB and other signals. The real sample rate is up to 2.4 MS/s, with 8-bit ADC resolution.
It supports uses such as aviation tracking (ADS-B), amateur radio monitoring, FM and AM broadcast listening, and spectrum analysis. The design is low-power and plug-and-play, and the receiver is portable.
