What else do I need to finish a DTF print?

You need hot melt powder, a powder shaker or manual application, an oven or heat source to cure the powder, and a heat press to transfer the film to fabric. The printer only produces the printed film.

Can it print on dark shirts?

Yes. The white ink channels lay down a white base under the color, which is what makes designs show on black and dark garments. The white ink needs regular mixing to stay consistent.

What media can it handle?

It accepts A4, A3 and A3+ sheets and 30 cm rolls of DTF film. Roll support lets you run longer jobs without reloading sheets.

The stated speed is about 6 minutes per A4 print. That is fine for small batches and one-offs but slow for high-volume production.

Does it need special power?

It runs on 110V at 50-60 Hz. Check that your outlet and circuit can handle it, and give it a stable, level surface given its 28 kg weight.

Is it good for a beginner?

It can work for a beginner who is willing to learn DTF workflow, including powdering, curing and pressing. Expect a learning curve on white ink maintenance and color profiles.

Where is the SHUNJITAI DTF-A31 Direct-to-Film Printer cheapest?

At Walmart, for $1,452.99, as of our latest check.

SHUNJITAI DTF-A31 Direct-to-Film Printer

Best price now

$1,452.99at WalmartChecked Nov 13

Prices are checked against each store and labelled with when.

Visit Walmart

SHUNJITAI DTF-A31 Direct-to-Film Printer

Best price now

$1,452.99at WalmartChecked Nov 13

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $1,452.99 at Walmart on Nov 13.

Our take on the SHUNJITAI DTF-A31 Direct-to-Film Printer

The SHUNJITAI DTF-A31 is a direct-to-film inkjet printer for custom garment decoration. It prints onto film in CMYK plus white, then the film is powdered, baked and heat-pressed onto fabric. It handles A4, A3, A3+ sheets and 30 cm rolls at up to 1440 dpi, with a continuous ink supply and a white ink mixing system. It suits small print shops and crafters moving from heat-transfer vinyl to full-color garment printing; against desktop DTF rivals it offers roll support and white ink circulation, but it is a single-function machine that still needs a separate powder shaker and oven.

Best forSmall garment print shopsCrafters printing full-color designs on shirtsUsers who want roll-fed DTF productionBuyers moving up from heat-transfer vinyl

Pros

Prints CMYK plus white for bright designs on dark fabric
Takes A4, A3, A3+ sheets and 30 cm rolls
1440 dpi resolution for detailed artwork
Continuous ink supply with white ink mixing
Low stated ink use of about 20 ml/m²
Compact footprint for a DTF unit

Cons

Needs separate powder, oven and heat press to finish
White ink channels require regular agitation and maintenance
Single A4 print takes about 6 minutes, slow for volume work
No built-in powder shaker or curing oven
Limited service and support network outside its home market

SHUNJITAI DTF-A31 Direct-to-Film Printer prices at every store

WalmartNew
In stockSold by shunjiReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$1,452.99Free shippingChecked Nov 13
Visit Walmart

About the SHUNJITAI DTF-A31 Direct-to-Film Printer

The SHUNJITAI DTF-A31 is a direct-to-film (DTF) printer for garment decoration. It prints a pattern onto film. Hot melt powder is then spread evenly over the pattern, the film is baked in an oven, and the pattern is heat pressed onto the garment.

It prints on A4, A3, A3+ and 30 cm roll media, at 6 minutes per A4 print. It uses CMYK plus white ink channels and a continuous ink supply system. A white ink mixing system is included, and ink loss is low at 20 ml/m². It is built for continuous production and is designed to save ink and electricity without clogging or slowing down.

Printer type: Direct-to-film (DTF) inkjet printer
Intended use: Custom garment printing
Media sizes: A4, A3, A3+, 30 cm roll
Ink: CMYK + white (CMYKWW channels)
Ink system: Continuous ink supply, white ink mixing system
Ink loss: 20 ml/m²
Resolution: 1440 x 720 dpi / 1440 x 1440 dpi
Print speed: 6 minutes per A4
Print height: 0-150 mm
Voltage: 110V, 50-60 Hz
Weight: 28 kg
Packing size: 82 x 39 x 36 cm
Clogging: No clogging
Energy: Energy-saving

Specifications

color: OtherSource
size: 82x39x36 cmSource
Supported media sizes: A4/A3/A3+/30cm RollSource
Ink configuration: CMYK+White InkSource
Print resolution

Questions and answers

What else do I need to finish a DTF print?: You need hot melt powder, a powder shaker or manual application, an oven or heat source to cure the powder, and a heat press to transfer the film to fabric. The printer only produces the printed film.
Can it print on dark shirts?: Yes. The white ink channels lay down a white base under the color, which is what makes designs show on black and dark garments. The white ink needs regular mixing to stay consistent.
What media can it handle?: It accepts A4, A3 and A3+ sheets and 30 cm rolls of DTF film. Roll support lets you run longer jobs without reloading sheets.
How fast is it?: The stated speed is about 6 minutes per A4 print. That is fine for small batches and one-offs but slow for high-volume production.
Does it need special power?: It runs on 110V at 50-60 Hz. Check that your outlet and circuit can handle it, and give it a stable, level surface given its 28 kg weight.
Is it good for a beginner?: It can work for a beginner who is willing to learn DTF workflow, including powdering, curing and pressing. Expect a learning curve on white ink maintenance and color profiles.
Where is the SHUNJITAI DTF-A31 Direct-to-Film Printer cheapest?: At Walmart, for $1,452.99, as of our latest check.