Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Oblivion V2 is a 15-inch competition subwoofer rated at 2000 watts RMS and 4000 peak, built around a 4-inch black-coated voice coil and a 300 oz Y35 triple-stack magnet. The dual 2-ohm voice coils wire to 1 ohm parallel or 4 ohm series, so it suits high-output mono amps. It weighs 49 lb and needs a 13.86-inch cutout with 10.2 inches of mounting depth, so check your box before buying. It is aimed at SPL and deep-bass builds on a budget, and owners rate it highly for output against costlier competition subs.
In stockReturn policy
Owners rate it very highly, praising the output and low-end extension for the money. Most mention it as a strong value against bigger-name competition subs.
The Oblivion V2 is a 15-inch dual voice coil, 2 ohm competition subwoofer. It is rated at 2000 watts RMS and 4000 watts peak. It has a 4-inch, 4-layer black coated voice coil and weighs 49 lbs.
The cone is pressed paper with a hard plastic dust cap and a high roll foam surround. The motor uses a 300 oz Y35 triple stack magnet. It also has a double layer Nomex spider pack, dual tinsel leads and 6 ga push terminals.
A 3000 watt, 1 ohm monoblock amplifier per subwoofer is at the mechanical limit of the sub and at its RMS power handling with some rise. A larger amplifier is not suggested, because failure can occur. The stiff suspension needs a 5-hour break-in period. Do not use it in the same enclosure as the Oblivion Version 1.
