The Oblivion V2 is a 15-inch dual-voice-coil car subwoofer built for competition-level output. It handles 2000 watts RMS and 4000 peak, with a 4-inch black-coated voice coil, a 300 oz triple-stack Y35 magnet and a double-layer Nomex spider pack. The DVC 4 ohm coils wire to 2 ohms parallel or 8 ohms series, so it pairs with a strong mono amp. It suits bassheads chasing high SPL and deep lows in a ported box; it is heavy at 49 lb and needs a large enclosure, so it is not a drop-in upgrade for a stock system.
In stockReturn policy
Rated 5 out of 5 from 21 ratings, owners report strong output and deep lows for the money.
The Oblivion Version 2 is a 15-inch competition subwoofer with dual 4-ohm voice coils. It is rated at 2000 watts RMS and 4000 watts peak. The dual voice coils wire to 2 ohms in parallel or 8 ohms in series.
It is built around a 4-inch, 4-layer black coated voice coil. The cone is pressed paper with a hard plastic dust cap, and the surround is high roll foam. A 300 oz Y35 triple stack magnet, a double layer Nomex spider pack and dual tinsel leads complete the moving assembly, and the 6 ga push terminals take the wiring. The subwoofer weighs 49 lbs.
It measures 15.3 inches across with a 13.86 inch baffle cutout and a 10.2 inch mounting depth. A suggested ported box is 3.3 to 3.9 cu ft tuned between 28 and 33 Hz. A 3000 watt 1 ohm monoblock amplifier per subwoofer sits at the mechanical limit of the sub; a larger amplifier can cause failure. A 5 hour break-in period is needed for the stiff suspension, and it should not be used in the same enclosure as the Oblivion Version 1.
It checks today's price at every store, compares the alternatives and answers in about a minute.




