This dotless linear LED strip light uses FCOB technology to give seamless light with no hot spots or dead spots. Brightness stays uniform along the whole length, unlike traditional strips where spaced-out diodes show as separate dots. The strip is 10 mm wide and runs on 24V DC.
The color temperature is tunable from 2700K warm white to 6500K cool white, and the strip has a 90 CRI rating. Power is 4.5W per foot. Brightness and color temperature can be adjusted with a controller and remote, which are sold separately. One remote can control multiple controllers and up to 4 zones.
The strip can be cut every 1 inch, so pieces can be sized to the application. The 10 mm width fits most standard aluminum channels. Suggested uses include kitchen cabinets, closets, edges and stairs, balconies, party decoration and weddings.
- Type
- Dotless linear COB LED strip light, tunable CCT
- Technology
- FCOB
- Color temperature
- 2700K to 6500K, adjustable
- CRI
- 90
- Power
- 4.5W per foot
- Voltage
- 24V DC
- Strip width
- 10 mm
- Roll length
- 5 m (16.5 ft)
- Cut length
- Can be cut every 1 inch
- Controller
- Sold separately; one control box is needed for every two 16.5 ft rolls
- Remote
- Sold separately; controls multiple controllers and up to 4 zones
- Wiring
- Yellow wire to WW terminal, white wire to CW terminal, black wire to any V+ terminal