It checks today's price at every store, compares the alternatives and answers in about a minute.
A two-part casting epoxy built for thick pours, up to 2 inches at a time, with at least 6 hours between layers. Its long working time suits river tables and deep molds where standard epoxy would overheat. The trade-off is clarity: it cures cloudy after A and B are mixed, so it is meant for tinted or pigmented work, not clear casts. Buyers rate it highly, and its main rivals are clear-casting epoxies that cost more per volume but stay transparent.
In stockShips from Canada · duties may applyReturn policy
Buyers rate it 5 out of 5 and value it for deep pours and tinted work. The cloudy finish is the known limitation, and the maker warns about it up front.
Slow Cure Casting Epoxy Resin is a two-part epoxy, Part A resin and Part B hardener, that cures to a cloudy finish. It suits projects where pigments are mixed in and a transparent look is not needed. The longer cure time makes it suitable for thick pours such as river tables.
Each pour can be up to 2 in thick. For more thickness, leave a gap of at least 6 hours and pour another layer on top of the previous one. The epoxy levels itself and is anti-foaming, and air bubbles are popped with a heat gun or plumber's torch.
Part A and Part B are mixed at 2.7 to 1 by volume, or 3 to 1 by weight. Pot life is 45 to 60 minutes, the surface sets to touch in 36 to 48 hours, and full cure takes 72 to 96 hours. The surface is ready to use after 96 hours.