StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai
S
Slow Cure Casting Epoxy Resin (for thick pours)

Slow Cure Casting Epoxy Resin (for thick pours)

5(44 ratings)

Best price now

$47.00at TrusticChecked 1 h ago

Prices are checked against each store and labelled with when.

Visit Trustic

Finding cheaper alternatives

Checking the Deal.ai store…

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Price facts

  • Lowest price today: $47.00 at Trustic (checked Nov 16, 2026).

Our take on the Slow Cure Casting Epoxy Resin (for thick pours)

A two-part casting epoxy formulated for slow curing, so heat builds up more gradually in thick pours. It handles up to 2 inches in a single pour, and deeper work is built up in layers with at least 6 hours between pours. That makes it a fit for river tables, embedded objects and chunky castings where standard fast-cure resin would overheat and crack. It is a specialty product for woodworkers and casters rather than a general-purpose coating resin, and the maker stresses cool room temperatures and strong ventilation for large batches.

Best forRiver tables and thick wood-and-resin slabsDeep castings with embedded objectsWoodworkers building up thick sections in layersMakers who want working time over fast demold
Pros
  • Up to 2-inch pours in one go
  • Long working time suits large batches
  • Layered pours possible with a 6-hour gap
  • Aimed squarely at thick casting work
  • High rating from a small but steady group of buyers
Cons
  • Slow cure means long waits between layers and before demolding
  • Large, thick batches need a room at 16°C or below
  • Needs big fans and good ventilation on big pours
  • Not the resin for quick, thin coating jobs

Slow Cure Casting Epoxy Resin (for thick pours) prices at every store

  • TrusticNew

    In stockShips from Canada · duties may applyReturn policy

    $47.00Checked 1 h ago
    Visit Trustic

What reviewers say

  • 5 / 544 ratings

Buyers rate it very highly, and the feedback centers on it doing the one job it is sold for: thick pours that stay workable long enough to finish.

What people mention
  • Pour depthPraisedBuyers say the 2-inch single-pour capability is the reason they choose it.
  • Working timePraisedThe long open time lets them mix and place large batches without rushing.
  • Cure speedMixedThe slow cure is the point, but it means waiting between layers and before demolding.
  • Heat controlPraisedThick sections reportedly set without the overheating that ruins fast-cure casts.

About the Slow Cure Casting Epoxy Resin (for thick pours)

This is a two-part casting epoxy made of a resin and a hardener, formulated to cure slowly for thick pours such as river tables. It dries crystal clear with a high-gloss, mirror-like surface and resists yellowing.

The two parts must be mixed in a precise ratio: 2.7 parts resin to 1 part hardener by volume, or 3 to 1 by weight. Pot life is 45 to 60 minutes. The epoxy self-levels and resists foaming, so it spreads across a level surface without tools, and it takes pigments of all colors.

Pour up to 2 in. at a time. For more thickness, leave a gap of at least 6 hours and pour another layer on top of the previous one; multiple flood coats should each be under 2 in. thick with 4 hours between coats. Pop air bubbles with a heat gun or plumber's torch. The surface sets to touch in 36 to 48 hours, cures in 72 to 96 hours and is ready to use after 96 hours.

Type
Two-part epoxy: resin (Part A) and hardener (Part B)
Mix ratio
2.7 to 1 by volume, or 3 to 1 by weight
Pot life
45 to 60 minutes
Maximum pour
2 in. at a time
Additional pours
Wait at least 6 hours between pours for extra thickness; 4 hours between flood coats, each under 2 in.
Coverage
About 2.5 L (Part A + B) for 1 sq ft at 1 in. thick
Set to touch
36 to 48 hours
Cure time
72 to 96 hours, depending on temperature, humidity and thickness
Ready to use
96 hours
Finish
Crystal clear, transparent, high-gloss, mirror-like
Leveling
Self-leveling

Questions and answers

How thick can one pour be?
Up to 2 inches at a time. For more thickness, wait at least 6 hours and pour the next layer on top.
Why does it need a cool room?
For batches over 1 gallon and thicker than 1 inch, the room should stay at 16°C or below so the exothermic reaction does not run away.
Is ventilation required?
Yes for large thick pours. The maker calls for big fans and proper ventilation around the project.
Can I use it for thin coating or jewelry?
It is built for thick casting. For thin coats and small quick casts, a faster-curing resin is the better match.
How long before I can demold?
Expect a long cure. Plan on extended waits between layers and before removing the piece from the mold.
Where is the Slow Cure Casting Epoxy Resin (for thick pours) cheapest?
At Trustic, for $47.00, as of our latest check.
What do buyers say about the Slow Cure Casting Epoxy Resin (for thick pours)?
Rated 5 out of 5 from 44 ratings.
Hardness
High after curing
Yellowing
Yellow resistant
Pigments
Works with pigments of all colors
Safety
Non toxic, low odor, low VOC
Large pours
Over 1 gallon and more than 1 in. thick: keep the room no warmer than 16 °C and ventilate with large fans
Storage
Away from direct sunlight, at 20 to 22 °C