
SNOWMELTZ 100 Sqft Embedded Heated Driveway System
Last price we saw
Prices change often: ask the agent below to check today's price at every store.
Prices are checked against each store and labelled with when.
Check today's price at MORE HeatPrice facts
- Last seen at $929.00 at MORE Heat on Nov 1.
Our take on the SNOWMELTZ 100 Sqft Embedded Heated Driveway System
The SNOWMELTZ 100 sq ft embedded heated driveway system is a 240V snow-melting mat rated at 37 watts per square foot, laid 2 feet wide in roughly 30-foot runs and buried under concrete, asphalt or pavers. It runs on a single circuit and pairs with an M326A or M326ARS moisture/temperature activator that switches on below 37°F when moisture is detected and keeps running about 90 minutes after the surface dries. The 50-watt version is the commercial/industrial spec; this 240V mat is the residential one. It is ETL-listed, and concrete kits include joint jumpers while asphalt and paver kits do not.
- 37 W/sq ft at 240V suits residential driveways and walks
- Automatic moisture and temperature activation below 37°F
- Runs about 90 minutes after moisture stops, clearing residual meltwater
- 2-foot-wide mats in roughly 30-foot runs cover 100 sq ft on one circuit
- ETL-listed, with GFCI protection included in the kit thermostat
SNOWMELTZ 100 Sqft Embedded Heated Driveway System prices at every store
- MORE HeatNew
Availability unknown
$929.00Checked Nov 1 - AmazonNew
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
$1,409.00Checked Nov 1
Store links may earn us a commission.
SNOWMELTZ 100 Sqft Embedded Heated Driveway System price history
Lowest price we've seen: $929.00 on Nov 1 at MORE Heat. Tracked across 2 stores since Nov 1.
From MORE Heat
- SnowMeltz mats provide 50 watts per square foot at 277 volts or 37 watts per square foot at 240 volts
- 50-watt models are primarily designed for commercial/industrial applications
- Choose either M326A or M326ARS activator; both activate when moisture is detected and temperature is below 37°F
- After moisture is no longer detected, the system continues to run for about 90 minutes
- M326ARS has a moisture sensor that can be remotely located up to 10 feet from the main activator unit
- Choose concrete installation (includes joint jumpers) or asphalt/pavers (no jumpers included)
- Sizes
- 50, 60, 75, 85, 100, 130
- Fit
- Floor profile: approximately 1/8″ additional height
- Returns
- 30-day returns
- Shipping
- Free ground shipping
- In the box
- Concrete kits include joint jumpers; asphalt/paver kits do not include jumpers, GFCI protection included with all kit thermostats
About the SNOWMELTZ 100 Sqft Embedded Heated Driveway System
This is an embedded heated driveway system that melts snow and ice from underneath the surface. The heating mats install beneath concrete, asphalt, or pavers. They run on 240V and put out 37 watts per square foot.
The system turns on automatically. Its activator starts heating when it detects moisture and the temperature is below 37°F. After moisture is no longer detected, it keeps running for about 90 minutes. The activator mounts outside and can switch up to 30 amps. The M326ARS activator has a moisture sensor that can be placed up to 10 feet from the main unit.
The mats add about 1/8 inch of height. Concrete kits include joint jumpers. Asphalt and paver kits do not. GFCI protection is included with all kit thermostats.
- Size
- 100 sq ft
- Coverage area
- 120 sq ft
- Mat width
- 2 ft
- Mat length
- Approximately 30 ft and 30 ft
- Voltage
- 240V
- Output
- 37 watts per sq ft
- Circuit
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Is 37 W/sq ft enough for a residential driveway?
- Yes for most homes. The 50 W/sq ft output is aimed at commercial and industrial use; 37 W/sq ft at 240V is the residential rating and handles typical snowfall when the system runs ahead of accumulation.
- How does the system decide when to turn on?
- The M326A or M326ARS activator turns the mat on when it senses moisture and the temperature is below 37°F. After moisture stops, it keeps running about 90 minutes to clear what has already melted.
- What is the difference between the M326A and M326ARS?
- Both switch up to 30 amps and mount outside. The M326ARS adds a moisture sensor you can place up to 10 feet from the activator unit, which helps when the activator sits in a spot that sees less snow.
- Do I need the concrete kit or the asphalt/paver kit?
- Match it to your surface. Concrete kits include joint jumpers for expansion joints; asphalt and paver kits do not include jumpers.
- Can it be added to an existing driveway?
- Not easily. The mats are embedded beneath concrete, asphalt or pavers, so they go in during a new pour or paver installation. Tearing up a finished driveway to add them is costly.
- What else do I need to budget for?
- A 240V circuit sized for the mat's draw, an electrician to wire the activator, and the activator itself if it is not bundled. GFCI protection is included with the kit thermostat.






