This solar-powered wall light has a built-in motion sensor and a light sensor. In the dark, it turns on automatically when it detects motion, and it turns off after about 30 seconds without motion. It uses 100 LED beads.
The set has a rectangular LED lamp unit with a circular motion sensor and a separate solar panel. A 16.40 ft cable connects them, so the panel can sit in direct sunlight while the lamp is installed under the eaves. The panel rotates 90° vertically and 360° horizontally to adjust its exposure to the sun.
The light is IP65 waterproof and is also heat-resistant and frost-resistant. It can be used indoors or outdoors, for example on stairs and at an entryway, doorway or garage.
- Product type
- Solar-powered motion sensor wall light
- Light source
- 100 LED beads
- Brightness
- 260 LM
- Motion detection
- 5-8 m / 16.40-26.25 ft, influenced by temperature and humidity
- Auto shut-off
- About 30 seconds after no motion is detected
- Solar panel
- 5.5V/1W, polycrystalline silicon
- Panel adjustment
- 90° vertical, 360° horizontal
- Battery
- Built-in 3.7V/1200mAh lithium battery
- Charge time
- 6 hours for a full charge
- Runtime
- Over 10 hours when fully charged
- Material
- ABS
- Water resistance
- IP65
- Cable length
- 16.40 ft
- Wall light size
- 15 x 5.5 x 14 cm (5.90 x 2.16 x 5.51 in)
- Wall light weight
- 195 g (0.42 lb)
- Solar panel size
- 13 x 4 x 13 cm (5.11 x 1.57 x 5.11 in)
- Solar panel weight
- 161.5 g (0.35 lb)
- In the box
- LED lamp unit, solar panel, connecting cable, mounting screws, plastic wall anchors
