This solar-powered dummy security camera has an LED light and an inductive (sensor) switch. The shell is made of aluminum alloy and ABS and is rated IP67. A solar panel charges the built-in battery.
To switch it on, long press the switch for 3 seconds to enter mode 1. Short press once for mode 2, again for mode 3, and again to shut it off.
Before first use, expose the solar panel to strong light for 2 to 3 seconds, or charge it fully in the sun. Avoid folding the solar panel often. Charging takes longer in weak or winter sunlight, and the battery may cut off without good sunlight. If you store it for a long time, charge it fully first and recharge it in the sun every three months to extend battery life.
- Material
- Aluminum alloy + ABS
- Dimensions
- 185 x 85 x 125 mm
- Protection
- IP67
- Light source
- LED
- Rated power
- 5 W
- Color temperature
- White, 6500K
- Voltage
- 3.7 V
- Battery
- 3.7V, 2800 mAh
- Solar panel
- 2 W, 5 V
- Switch type
- Inductive
- Time interval
- 15-20 seconds
- Modes
- 3 modes, plus off
- Working temperature
- -10 to 60°
- In the box
- 1 solar camera