

The TB6600 is a bipolar stepper driver board that takes pulse and direction signals and drives two-phase motors from Nema 17 up to Nema 34 frames. It offers eight current settings from 0.5A to 4.0A and six microstep modes up to 1/32, with optically isolated inputs and a semi-enclosed case. It suits hobby CNC, 3D printer retrofits and small automation builds where a cheap, widely copied driver is enough. Compared with the A4988 and DRV8825 pololu-style drivers, it handles far more current and larger motors, but it is bulkier, needs an external heatsink-free enclosure and has no digital configuration.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Owners of budget CNC and automation builds generally find the TB6600 works reliably for Nema 23 motors at moderate current. Complaints center on clone quality, unclear DIP switch labeling and heat when pushed toward its rated current.
This is a TB6600 stepper motor driver for Nema 17, Nema 23 and Nema 34 motors. It runs on 9-42 VDC, with 12-30 V recommended, and puts out 0.5 A to 4.0 A.
The driver uses H-bridge bipolar constant phase flow drive, and the input signal is high-speed optically isolated. It has six subdivision settings — 1, 2, 4, 8, 16 and 32 — and eight output current levels.
It takes a common anode single pulse interface with pulse/direction signal input, and it drives 4, 6 and 8 lead two-phase and four-phase stepper motors. The current is automatically halved at rest. The semi-enclosed case has built-in temperature protection and overcurrent protection.
It checks today's price at every store, compares the alternatives and answers in about a minute.




