This bundle pairs a Sundown Audio SA-12 v.3 subwoofer with a Sundown dual 12-inch ported enclosure built for the SA v.3. The sub handles 1500W RMS and 3000W peak, with 22mm of Xmax and a 2.75-inch aluminum voice coil former for heat dissipation. It suits bassheads who want a competition-grade 12 in a matched ported box without sizing an enclosure themselves. Against bare SA v.3 drivers, the bundle adds a pre-tuned ported cabinet; against cheaper 12s, the SA line is known for taking abuse well past its rating.
In stockReturn policy
Owners of the SA v.3 line rate it highly for output and durability at its power level, and the ported enclosure is seen as a sensible match. Most complaints center on the space the box takes and the amplifier and electrical support the sub demands.
This bundle pairs a Sundown Audio SA-Series v.3 12-inch subwoofer with a Sundown Audio dual 12 SAV3 ported subwoofer enclosure. The subwoofer is rated at 1500 watts RMS and 3000 watts peak. It is offered with dual 2-ohm or dual 4-ohm voice coils, shown as D2 and D4 in the specifications.
The subwoofer is built around a 2.75-inch aluminum voice coil former with high-temperature copper coil wire and stitched XL tinsel leads. Its vented magnetic gap, solid pole piece and Faraday rings at the magnet ID and pole cap are made for smoother response and reduced distortion. Linear Xmax is 22 mm and the mechanical excursion limit is 41 mm, and spring-loaded terminals hold the wiring.
The enclosure is built from 3/4-inch (18 mm) Russian Baltic Birch plywood with a solid 1-inch (24 mm) 17-ply birch front baffle and a center-mounted internal baffle brace. It gives 3.5 cubic feet of net internal volume, is tuned to 33 Hz, and is rated for systems up to 3500 watts, or 1750 watts RMS per sub.
It checks today's price at every store, compares the alternatives and answers in about a minute.






