
SunGold Power 20kW Off-Grid Solar Kit
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A complete off-grid solar package built around two 10,000W inverters, 32 bifacial 450W panels and 32.14kWh of LiFePO4 storage in two sealed outdoor batteries. The array is rated to produce roughly 58 to 72kWh on a strong day, and the bank delivers about 27.4kWh to AC loads, enough to run a refrigerator for around 182 hours. It suits owners of a remote home, cabin or workshop who want a large, room-free power system in one purchase. Against smaller kits it trades simplicity for scale: the battery bank limits battery-only output to about 14.1kW even though the inverters are rated 20kW continuous, so motor-starting headroom depends on conditions and wiring.
In stockReturn policy
This off-grid solar kit combines two 10,000W inverters, 32 bifacial solar panels rated 450W each, and 32.14kWh of LiFePO4 storage in two PowerMax batteries. The batteries are sealed and IP65 rated. They mount outside on a pad or a wall, so nothing in the system needs a conditioned room.
The 14.4kW array produces roughly 58 to 72kWh per day at 4 to 5 peak sun hours. The rear face of the panels also picks up reflected light off gravel, concrete or snow. Each battery provides 7.68kW of continuous DC discharge power. Together they provide 15.36kW DC, which supports approximately 14.1kW of battery-only AC output after conversion losses.
The two inverters have a combined 20,000W continuous rating and 40,000W peak rating. Actual output and motor-starting capability also depend on battery limits, temperature, wiring and operating conditions. The combined peak rating does not guarantee startup power from the included batteries, so motor-starting requirements should be checked against the complete system. Runtime estimates start from a full charge with no solar input and apply to individual loads. Running several appliances together reduces runtime.












