
Sunpro Power 440W TOPCon Bifacial Solar Panel – SPDG440-N108M
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Sunpro Power SPDG440-N108M is a 440W N-type TOPCon bifacial solar panel with up to 22.53% module efficiency. Its rear side adds generation when mounted over a reflective surface, and TOPCon cells resist the light-induced degradation that older PERC panels slowly lose output to. It suits rooftop and ground-mount installs where space is tight or where a reflective underlay can lift yield. Against mainstream monofacial 440W panels it offers more output per square meter and better low-light behavior, but it needs a compatible inverter and racking that leaves the back open to earn that gain.
In stockReturn policy
The Sunpro Power SPDG440-N108M10 is a 440 W bifacial solar panel built on N-type TOPCon mono-crystalline cells. Its 108 half-cut cells use a multi-busbar layout designed to maximize light capture and reduce internal resistive losses. Module efficiency is 21.00%, and the power tolerance is 0 to +5 W, so each panel is rated at or above its stated output.
The panel is dual-glass, with 2.0 mm ultra-clear embossed double-layer colorless front glass and 2.0 mm semi-tempered back glass in a black aluminum alloy frame. It is built to withstand 5400 Pa snow loads and 2400 Pa wind loads. An IP68 junction box and MC4-compatible connectors make the electrical connections.
Both faces collect light: bifaciality is above 80%, and with 15% rear-side gain total output reaches 506 W under reference bifacial conditions. The cells are specified for low-light performance in haze and overcast conditions and for resistance to potential-induced degradation. The linear power warranty runs 30 years, retaining 89.4% at year 25 and 87.4% at year 30, with a 25-year product quality guarantee.