
Tempest Aa48108-2 Oil Filter
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Tempest AA48108-2 is a spin-on aviation oil filter for Lycoming and Continental piston engines. Its internal magnet traps fine steel particles too small for the filter media, and the media itself has more area than rival aviation filters. The "Dash II" body is 5/16 inch shorter than the standard AA48108, which helps in tight cowlings. Owners value the magnet and the captive installation nut; the main trade-off is that it is a short-life filter you replace at every oil change, and it only fits engines that take the 48108 thread and gasket size.
In stockSold by Patio & FireReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Aircraft owners and mechanics generally rate the Tempest filters well, citing the internal magnet and the secure nut as the reasons they pick it over the competition. Complaints are few and mostly about fitment on engines that need a different size.
The Tempest AA48108-2 is an aviation oil filter that keeps engine oil clean. It has an internal magnet that attracts fine steel particles too small for the filter media to catch. The filter media area is 311 square inches. A leaf spring keeps the filter pack stable from side to side.
The nut welds are strong enough that the can distorts before the welds break. In production testing, the nuts are ripped away from the can, and the base metal must fail before the welds do. The bottom roll seam is built for a burst strength over 600 psi, which is 50 percent above the ARP 1400 standard. The filter meets the TCM bypass specification of 12-14 psi.
The gasket is a lubricated synthetic rubber, made from a proprietary compound, that helps give proper torque on installation and easy removal. To install, lubricate the gasket with Dow Corning 4 compound or equivalent, or with clean engine oil if that is unavailable. Torque the filter to 16-18 ft-lb, run the engine and check for oil leaks, then check the oil level. Safety wire the filter.




