
ToughMax 1x Tungsten Carbide Chain for small saws, 12 inch
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The ToughMax is a 12-inch replacement chainsaw chain with tungsten carbide cutters instead of steel ones. It uses a 3/8 low-profile pitch, .043 gauge and 44 drive links with 22 cutters, matching small saws that run a 12-inch bar. The carbide tips stay sharp far longer than standard chain and shrug off ground contact, so it suits people cutting a lot of firewood or clearing brush who would rather not file a chain. The trade-off is a heavier, stiffer chain that needs a saw with enough power, and carbide cannot be sharpened with a normal round file.
In stockShips from Australia · duties may applyReturn policy
This is a 12-inch tungsten carbide tipped saw chain for small chainsaws. It has 44 drive links and 22 cutters, with a 3/8 low-profile pitch and a .043 gauge.
The cutters are semi chisel, and the tips are tungsten carbide. The chain's raw material is 68CRNIM033 steel imported from Germany. The carbide tips resist dulling even when they touch the ground, though ground contact shortens the life of the chain.
To check the fit, count the cutters on your last chain: if there are 22 and no long gap between two cutters, this is the right length for a 12-inch bar. The chain cuts 5,000 kg to 15,000 kg of wood without sharpening, about the equivalent of 10 sharpenings. Sharpen it with a 4.0 mm or 3.2 mm diamond disk.
It checks today's price at every store, compares the alternatives and answers in about a minute.