

This is an 18-inch, 62-drive-link replacement chain in 3/8 low-profile pitch with .050 gauge, built on Oregon's 91PX AdvanceCut line (the successor to the 91VG). It fits bars stamped 3/8LP or 3/8 Low Profile .050, including many Craftsman/Sears saws that used part 71-3619. Chamfer-chisel cutters with twin cutting corners cut fast, and the narrow kerf asks less of small engines, so it suits homeowners, farmers and orchardists running smaller-cc saws. Against full-size 3/8 chains it trades raw speed on big saws for lower vibration and reduced kickback.
In stockReturn policy
Owners of small and mid-size saws generally report clean, fast cuts and less vibration than the chain it replaces. The main complaints come from buyers who ordered the wrong pitch or drive-link count.
The 71-3619 is an 18-inch replacement saw chain with 62 drive links, a 3/8 low-profile pitch and a .050 inch (1.3 mm) gauge. It is the updated version of the Oregon 91VG chain.
The cutters are Chamfer Chisel, with twin cutting corners. The narrow kerf takes less power from the saw and helps it hold higher RPM while cutting. A bumper drive link and depth gauge design reduce kickback.
The chain sharpens with a 5/32 inch file at 30 degrees. It fits any bar stamped 3/8LP or 3/8 low profile, .050 inch, 62 drive links; if the drive link on the current chain is stamped 91 and there are 62 drive links, this chain fits the saw.
It checks today's price at every store, compares the alternatives and answers in about a minute.




