
Travel Trailer Entry Door Lock with Deadbolt, RV Replacement Latch for 2-3/4 x 3-3/4 Inch Cutouts and 1-1/4 to 1-1/2 Inch Thick Right-Hinged Doors
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
A replacement entry latch for travel trailers, with a built-in deadbolt and a rear locking function. It fits a 2-3/4 × 3-3/4 inch cutout on right-hinged doors 1-1/4 to 1-1/2 inches thick. The fit is narrow and specific: it is not listed for Class A or Class C RVs, so measure the opening and check hinge side before ordering. Against generic RV latches, the deadbolt is the main draw; it is a basic mechanical lock, not a high-security one.
In stockReturn policy
This is a travel trailer entry door lock with a built-in deadbolt and a rear locking function. It is a mechanical replacement lock, not a smart lock or electronic security device.
The lock is made of die-cast zinc alloy. It fits a 2-3/4 × 3-3/4 inch cutout in a door 1-1/4 to 1-1/2 inches thick. It is for right-hinged doors.
It fits travel trailer doors and may fit cargo or horse trailer doors when the dimensions and hinge orientation match. It is not compatible with Class A or Class C RVs. To install, align the front and rear portions and plate, then hand-tighten the screws without overtightening; do not use a screw gun or impact wrench. Test the latch, deadbolt and inside release before relying on the installed lock.
It checks today's price at every store, compares the alternatives and answers in about a minute.




