Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a 24V COB LED strip from TILLUME that tunes from 2200K warm white to 6500K daylight, with CRI above 90 and 1100 lumens per meter at 15W per meter. The COB layout packs 574 LEDs per meter behind a diffused, dot-free light line, and the IP67 waterproof jacket suits bathrooms, kitchens and outdoor coves. It dims to 0.1% with a suitable PWM dimmer and works with KNX or DALI tunable-white controllers, including dim2warm and circadian schedules. Against fixed-white strips it costs more and needs a two-channel controller, but it replaces several single-color strips and gives smoother dimming than most constant-voltage rivals.
In stockShips from China · priced in EUR (€68.28) · duties may applyReturn policy
This is a waterproof tunable white LED COB strip that runs on 24V DC. Its color temperature can be set anywhere from 2200K to 6500K, and brightness and color temperature can be adjusted individually. It supports a "dim2warm" effect and a circadian color gradient through the day: bright daylight tones in the daytime and a warm color temperature at night.
The strip has 3M adhesive tape on the back for installation. It is flexible and can be cut with scissors at the designated points, and cut sections can be reused in new runs. For a full 5 meter length, connect the driver at both ends. The 120W rating is tested at 5 meters.
It works with KNX or DALI dimmers and with PWM dimmers. With suitable PWM dimmers it dims down to 0.1%. When using the MDT dimmers listed below, turn on the balance wattage function in the software.
