A corded random orbital sander with a brushless EC motor rated at 350 W, running on 120 V at 60 Hz. It has a 150 mm backing plate and a 5.0 mm orbit, with speed adjustable from 4000 to 10000 rpm.
Speed is set two ways. In one mode a lever on top raises the speed to the maximum of each setting; in the other, rpm+ and rpm- buttons on the rear handle step through six fixed speed levels. An electronic brake stops the pad within two seconds.
The body is symmetrical so it can be held in either hand, and long enough for a two-hand grip, with extra room at the front for the ring and little finger. A threaded dust port fitting sits on the side, and the 5 m PVC cable runs from the back.
- Type
- Random orbital sander, corded
- Power
- 350 W
- Voltage
- 120 V, 60 Hz
- Motor
- Brushless EC motor
- Orbit size
- 5.0 mm
- Backing plate
- 150 mm
- Speed
- 4000–10000 rpm
- Speed control
- Two modes; six fixed speed levels (rpm+/rpm-)
- Braking
- Electronic brake, stops within two seconds
- Cable
- 5 m PVC
- Dust port
- Threaded fitting on the side
- In the box
- 10 sanding papers
- Shipping weight
- 2350 g