The Vatrer 48V (51.2V) 100Ah server rack battery stores 5120Wh of energy. It holds solar power generated during the day so it can be used later, such as in the evening. It uses EV-grade LiFePO4 cells rated for over 5000 charge cycles.
A 100A Smart Battery Management System (BMS) monitors the battery and protects it from overcharging, overdischarging, overcurrent and short circuits. Low-temperature protection stops charging below 32°F and pauses discharging below -4°F. WiFi, Bluetooth and a built-in touch display handle monitoring. Through WiFi, users can monitor the battery remotely, adjust settings, perform OTA firmware updates and manage multiple batteries.
The battery has a standard server rack form factor and can be placed horizontally or mounted vertically in a rack. Up to 10 units can be connected in parallel, for a total of 51.2kWh. It can be charged with a 58.4V 20A LiFePO4 charger, from solar panels through an MPPT controller, or from a generator with a DC-DC charger. It suits home solar, RV, marine, off-grid cabin and mobile energy systems.
- Nominal voltage
- 48V (51.2V)
- Capacity
- 100Ah, 5120Wh
- Cell type
- EV-grade LiFePO4
- Cycle life
- Over 5000 cycles
- BMS
- 100A Smart BMS with overcharge, overdischarge, overcurrent and short-circuit protection
- Low-temp protection
- Charging stops below 32°F; discharging pauses below -4°F
- Connectivity
- WiFi, Bluetooth, built-in touch display
- Remote features
- Remote monitoring, settings adjustment, OTA firmware updates, multi-battery management
- Expansion
- Up to 10 units in parallel, up to 51.2kWh total
- Charging
- 58.4V 20A LiFePO4 charger (about 5 hours to full), solar via MPPT controller, generator via DC-DC charger
- Form factor
- Standard server rack; horizontal or vertical rack mounting
- Applications
- Home solar, RV, marine, off-grid cabins, mobile energy systems