
Victron Orion-Tr Smart 48/12-30A (360W) Isolated DC-DC Charger
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Victron Orion-Tr Smart 48/12-30A is an isolated DC-DC charger that steps a 48V system down to a 12V service battery, delivering up to 30A (360W). It is a fully programmable three-stage charger with built-in Bluetooth, so you set the charge profile and watch the output from the VictronConnect app. Engine-running detection makes it work with smart alternators, and it handles both lead-acid and lithium banks. Compared with fixed-output DC-DC converters, it adds adaptive charging and remote monitoring; compared with Victron's smaller Orion-Tr units, it moves more current but needs a 48V source.
In stockSold by DealClockReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners of Victron Orion-Tr chargers generally rate the build and the app control highly, and the isolated version is valued in 48V-to-12V installs. Complaints tend to focus on setup complexity and heat in tight spaces rather than reliability.
The Orion-Tr Smart 48/12-30A is an isolated DC-DC charger for dual battery systems in vehicles and boats, where the alternator and start battery are used to charge the service battery. It is an adaptive three-stage charger with built-in Bluetooth, rated at 360 W. It can be used in 48 V systems and works with both lead acid and lithium batteries.
Bluetooth Smart is built in, so a smartphone, tablet, or other Bluetooth-enabled device can monitor the charger, change settings, and update it when new software features become available. The VictronConnect app shows key data, including warnings and alarms, on the Device list page without connecting to the product. The charge algorithm is fully programmable, or a fixed output can be chosen. A built-in engine running detection mechanism makes it suitable for vehicles with a smart alternator, including Euro 5 and Euro 6 engines, and the engine shutdown detection stops the converter when the engine is not running to prevent unwanted discharge of the starter battery.
The adaptive charge algorithm runs bulk, absorption, and float stages. For lead acid batteries the absorption time is kept short during shallow discharges to prevent overcharging and is automatically increased after a deep discharge so the battery is fully recharged; for lithium batteries the absorption time is fixed at a default of 2 hours. All models are short circuit proof and an unlimited number of units can be connected in parallel to increase output current. The output current reduces at high ambient temperatures, and the unit has IP43 protection when installed with the screw terminals oriented downward. Installation uses screw terminals and needs no special tools. The input fuse is not replaceable. A remote on/off switch or relay contact can be connected to the two-pole connector.
It checks today's price at every store, compares the alternatives and answers in about a minute.








