This is a set of solder seal wire connectors: heat shrink butt connectors with a ring of solder inside. A joint is made in one step — the wire is soldered, insulated and sealed at the same time. Each connector is polyolefin tubing with hot melt adhesive inside.
The terminal body is copper with tin plating, and the insulation is PE. When heat is applied, the tubing shrinks while the solder and adhesive melt, so the connection is soldered and the tubing seals around it. The connectors provide pullout strength, strain relief, a cable check and insulation, and the seal is waterproof.
They are used for wiring in marine and automobile applications, joining wires of matching cross-section from 26-24 AWG to 12-10 AWG.
- Type
- Solder seal heat shrink butt connectors
- Connection
- One step: soldered, insulated and sealed
- Tubing
- Polyolefin heat shrink
- Adhesive
- Hot melt adhesive inside
- Terminal body
- Copper, tin plated
- Insulation
- PE
- Seal
- Waterproof
- Wire sizes
- 26-24 AWG (0.25-0.34 mm²), 22-18 AWG (0.5-1.0 mm²), 16-14 AWG (1.5-2.5 mm²), 12-10 AWG (4.0-6.0 mm²)
- Connector diameters
- 1.5 mm, 3.0 mm, 5.0 mm, 6.0 mm
- Applications
- Marine and automobile wiring
- In the box
- Heat shrink wire connectors in four sizes