The WEN DP1263V is a 12-inch benchtop drill press with a 6.2-amp induction motor. It has a 5/8-inch keyed chuck and an MT2 spindle taper. The cast iron base measures 10 by 16 inches and has predrilled mounting holes.
Spindle speed adjusts mechanically from 580 to 3100 RPM, and a digital LED readout shows the current speed. An X-pattern laser marks the center point, and an overhead light illuminates the workpiece. The chuck key stores onboard.
The 9-1/2 by 9-1/2-inch cast iron worktable bevels 45 degrees left and right and includes a table roller extension. The motor drills up to a 5/8-inch hole through 1-inch-thick cast iron. The drill press weighs 85 lb and measures 22.00 by 13.50 by 36.60 inches.
- Power
- 120 V, 6.2 A, single phase
- Chuck
- 5/8 in keyed
- Spindle taper
- MT2
- Spindle speed
- 580 to 3100 RPM, variable
- Drilling capacity
- 5/8 in hole through 1 in cast iron
- Worktable
- 9-1/2 x 9-1/2 in cast iron, bevels 45 degrees left and right
- Table extension
- Roller
- Base
- 10 x 16 in cast iron with predrilled mounting holes
- Laser
- X-pattern center point
- Light
- Overhead
- Speed readout
- Digital LED
- Chuck key storage
- Onboard
- Weight
- 85 lb