

The WEN JT833H is a benchtop jointer with an 8-inch spiral cutterhead that carries 16 staggered HSS blades, driven by a 10-amp motor at up to 12,000 rpm. Its 33-by-8-inch table extends to 51 inches with support arms, and the fence bevels to 45 degrees. It removes up to 1/8 inch per pass with an onboard depth-of-cut scale. It suits hobbyists and small shops that need to flatten and square boards without floor space for a full-size jointer. Against helical-head benchtop jointers, the spiral HSS insert head gives a smoother finish than straight-knife machines, but it is not a true helical carbide head and the tables are shorter than cast-iron floor models.
In stockReturn policy
Owners rate it well overall, praising the spiral head's smooth finish and the value of an 8-inch jointer in a benchtop footprint. Complaints center on table flatness, fence rigidity and setup adjustments.
The WEN JT833H is an 8-inch benchtop jointer that flattens and squares boards. Its spiral cutterhead holds 16 staggered HSS blades, and a 10-amp motor turns the cutterhead at up to 12,000 revolutions per minute.
The table measures 33 by 8 inches, and support arms extend it up to 51 inches for longer workpieces. The infeed table adjusts to remove 0 to 1/8 inch of material per pass, and an onboard depth-of-cut scale shows the setting. The 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees for angled cuts along the faces of boards.
A spring-loaded blade guard covers the cutterhead and exposes only a limited section during jointing. The jointer ships with two push blocks and has onboard 2-1/2-inch and 4-inch dust ports. It takes WEN BP510H replacement spiral blades.
It checks today's price at every store, compares the alternatives and answers in about a minute.





