Is the WEN 6502T good for a home workshop?

Yes. It combines belt and disc sanding in one benchtop unit with a motor that handles most home-shop work. Expect to spend time on setup and belt tracking.

How does it compare with a standalone belt sander?

It adds a 6-inch disc and a tilting belt in one footprint, so it covers more tasks than a belt-only machine. A dedicated floor sander will still be more rigid and better at dust control.

Does the belt really tilt to 90 degrees?

Yes, the belt assembly tilts from horizontal to vertical, which helps with edge and end-grain work. Recheck the table squareness after changing the angle.

Can I hook up a shop vacuum?

Yes. The 2.25-inch dust port accepts a hose from a shop vacuum or extractor. Collection is decent but not complete, so wear a mask for fine dust.

What comes in the box?

The sander, a miter gauge, a stop bar and the dust port are included. Sanding belts and discs are consumables you supply in the grits you need.

WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T

Best price now

$110.00at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T

Best price now

$110.00at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $110.00 at Walmart on Nov 9.

Our take on the WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T

The WEN 6502T is a combination benchtop sander with a 4 x 36-inch belt and a 6-inch side disc, driven by a 4.3-amp, 1/2 HP motor. The belt tilts from 0 to 90 degrees, and a cast-iron base keeps vibration down during heavier passes. It suits home woodworkers and small shops that want belt and disc sanding in one footprint, and it undercuts most rivals on capacity rather than refinement. Owners rate it highly overall, though some note the tables and tracking need careful setup.

Best forHome woodworkers on a budgetSmall shops short on bench spaceSquaring and shaping edges, curves and end grainBuyers who want belt and disc sanding in one machine

Pros

Two sanders in one: 4 x 36-inch belt plus 6-inch disc
4.3-amp, 1/2 HP motor holds speed under load
Belt tilts 0 to 90 degrees for angled work
Cast-iron base damps vibration
Cast-aluminum disc table, miter gauge and stop bar included
2.25-inch dust port takes a shop vacuum or extractor

Cons

Belt tracking and tension need fiddling to set up
Dust collection is partial; fine dust still escapes
Disc table and miter slot are basic, not precision-grade
No built-in worklight or storage for accessories

WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T prices at every store

WalmartNew
In stock
$110.00Free shippingChecked Nov 9
Visit Walmart

What reviewers say

4.5 / 5125 ratings

Owners rate the 6502T well, calling it a lot of sander for the money and praising the motor and cast-iron base. Common complaints center on belt tracking setup, dust that escapes the port, and tables that need squaring out of the box.

What people mention

Motor powerPraisedOwners say the 1/2 HP motor keeps the belt moving under firm pressure without stalling.
Belt trackingCriticisedSeveral owners report the belt wanders and needs repeated adjustment to stay centered.
Dust collectionMixedThe 2.25-inch port catches much of the debris, but fine dust still escapes into the air.
Build and vibrationPraisedThe cast-iron base is credited with keeping the machine steady and quiet in use.
SetupMixedBuyers say the tables and belt need squaring and alignment before the sander works well.

About the WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T

The WEN 6502T is a belt and disc sander for smoothing wood and lumber and removing jagged edges and splinters. It has a 4.3-amp, 1/2 HP motor and a 4-inch-by-36-inch sanding belt, plus a 6-inch sanding disc on the side.

The belt tilts from 0 to 90 degrees to suit the workpiece. The belt can be changed quickly to switch sandpaper grits. A heavy cast-iron base reduces vibration, and the sanding disc has a cast-aluminum work table.

It comes with a miter gauge for sanding angled edges and a stop bar. A 2.25-inch dust port connects to a dust extractor.

Motor: 4.3 amp, 1/2 HP
Belt size: 4 in x 36 in
Disc size: 6 in
Belt tilt: 0 to 90 degrees
Base: Cast iron
Disc work table: Cast aluminum
Dust port: 2.25 in
Color: Black
Accessories: Miter gauge, stop bar
Warranty: Two years

Specifications

color: BlackSource
size: 4" x 36"Source

Questions and answers

Is the WEN 6502T good for a home workshop?: Yes. It combines belt and disc sanding in one benchtop unit with a motor that handles most home-shop work. Expect to spend time on setup and belt tracking.
How does it compare with a standalone belt sander?: It adds a 6-inch disc and a tilting belt in one footprint, so it covers more tasks than a belt-only machine. A dedicated floor sander will still be more rigid and better at dust control.
Does the belt really tilt to 90 degrees?: Yes, the belt assembly tilts from horizontal to vertical, which helps with edge and end-grain work. Recheck the table squareness after changing the angle.
Can I hook up a shop vacuum?: Yes. The 2.25-inch dust port accepts a hose from a shop vacuum or extractor. Collection is decent but not complete, so wear a mask for fine dust.
What comes in the box?: The sander, a miter gauge, a stop bar and the dust port are included. Sanding belts and discs are consumables you supply in the grits you need.
Where is the WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T cheapest?: At Walmart, for $110.00, as of our latest check.
What do buyers say about the WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T?: Rated 4.5 out of 5 from 125 ratings.