This WiFi baby monitor camera is built for remote monitoring from a phone. It records video at 1.0MP 720P (1280x720) resolution. It pans 355 degrees and tilts 100 degrees.
The camera has plug-and-play (P2P) setup: plug in the power and follow the steps in the app. It connects to Wi-Fi but does not support 5G. For the first connection, the phone and camera must be on the same network. Apps are available for iOS and Android. The iOS app has slightly fewer functions than the Android app, and app updates are meant to close the gap.
Motion detection triggers alarms and video recording. Alarm information is recorded on the Micro SD card and also appears on the mobile device. Once an alarm is read, it is removed from the phone, so alarm photos should be saved to the phone. Two-way audio lets you hear and talk through the camera. Placing the camera away from other electronic devices reduces noise from signal interference. When the IR sensor detects low light, the IR LED turns on and the camera switches to night vision mode.
- Resolution
- 1.0MP 720P (1280x720)
- Pan and tilt
- 355° pan, 100° tilt
- Night vision
- Yes, IR LED switches on automatically in low light
- Audio
- Two-way audio
- Detection
- Motion detection with alarm and video recording
- Storage
- Micro SD card recording, up to 64G (about 60 days), with playback
- Wi-Fi
- Supported; 5G not supported
- Setup
- Plug and play (P2P)
- App
- iOS and Android
- Onvif/NVR
- Not supported; uses its own software for phone remote monitoring