
Wireless control Stepper motor
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $37.43 at KitsGuru (checked Nov 17, 2026).

Prices are checked against each store and labelled with when.
This is a do-it-yourself electronics kit that drives a stepper motor from a touchscreen over a radio link. A touchscreen panel feeds a controller, which sends direction and speed commands through an RF transmitter; an RF receiver decodes them and drives the motor, with status shown on a 16x2 LCD. It suits students, hobbyists and lab learners who want a hands-on build covering touch input, RF communication and motor drive. Against a plain wired driver board, it adds a wireless link and an on-screen interface, but it is a learning kit, not a finished appliance: expect assembly, programming and a limited current rating.
In stockShips from India · priced in INR (₹3,499.00) · duties may applyReturn policy
The wireless control stepper motor is a kit for setting a stepper motor's direction and speed from a touch screen, with no wired link between the touch screen and the motor. It has two sections: an RF transmitter and an RF receiver. A 16x2 LCD shows information from the controller, and the motor used in the kit is a Nema 17 stepper motor.
The touch screen is divided into sections for different inputs. The controller reads which section is pressed and generates the matching output signals. The data is sent by the RF transmitter, decoded by the decoder IC at the RF receiver, and the controller then produces the signals that drive the motor.
Because the motor is a high-current device, it is not connected directly to the controller; a motor driver sits between them and takes its control signals from the microcontroller. The information the microcontroller outputs is shown on the LCD, whose interface is set up through programming.
It checks today's price at every store, compares the alternatives and answers in about a minute.