This is a wireless dog fence and training system. It has a handheld transmitter and a receiver collar. The collar has three training modes: beep, vibration and static shock. Each mode has levels from 0 to 9, and level 0 turns it off. The collar should be started at the lowest level.
In fence mode, the system uses 2.4G frequency technology for signal transmission from 50 ft to 990 ft. The collar pairs automatically after power on, and one transmitter can connect with an unlimited number of receiver collars. When the dog goes out of range, the collar gives a 5-second sound, a 5-second vibration and a 6-second shock. After 2 cycles of this, it gives a "didi" sound until the dog returns to the set distance. After 5 minutes of shock, it goes into standby mode.
The collar is sealed with silicone and is IPX6 waterproof. The charging port must be well sealed before the dog goes into water. Reflective strips on the collar make the dog easier to see at night. The transmitter and collar are both rechargeable and charge with a 2-in-1 Type-C cable and adapter. They can be charged from a PC, phone charger, laptop or power bank.
- Training modes
- Beep, vibration, static shock
- Intensity levels
- 0 to 9 (0 is off)
- Channels
- 4 channels, for training up to 4 dogs at once
- Signal
- 2.4G frequency
- Range
- 50 ft to 990 ft
- Pairing
- Automatic after power on
- Transmitter battery
- 2500mAh rechargeable; 3-5 days of use after about 3-4 hours of charging
- Collar battery
- 500mAh rechargeable; up to 15 days of standby after about 1-2 hours of charging (depends on use)
- Waterproofing
- IPX6 collar receiver
- Collar
- Adjustable nylon strap with plastic buckle and reflective strips
- Transmitter
- Handheld, with digital display and colored buttons
- Charging
- 2-in-1 Type-C cable and adapter
- In the box
- Transmitter, receiver collar, power adapter, USB charging cable, metal contact points with rubber covers
