DealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai › Tire Changing Tools
WYDDDARY
WYDDDARY R16 R17.9-19.5 R22.5 Electric Truck Tire Changer Portable Tire Changing Machine Vacuum Tire Changing Machine 110V 4kW

WYDDDARY R16 R17.9-19.5 R22.5 Electric Truck Tire Changer Portable Tire Changing Machine Vacuum Tire Changing Machine 110V 4kW

Where to buy

No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

WYDDDARY R16 R17.9-19.5 R22.5 Electric Truck Tire Changer Portable Tire Changing Machine Vacuum Tire Changing Machine 110V 4kW prices at every store

  • WalmartCheck price at Walmart

About the WYDDDARY R16 R17.9-19.5 R22.5 Electric Truck Tire Changer Portable Tire Changing Machine Vacuum Tire Changing Machine 110V 4kW

Product Parameters: Voltage: 110V Motor power: 4KW Applicable tires: disassembly and assembly of R16 R17-9-19.5 R22.5 all series tires Rotation speed: 4 times/ min Controller battery: AAA battery*2 (This unit does not come with batteries.) Use warning: 1. Before removing the tire and installing the tire, the grease must be evenly applied on the tire mouth, otherwise it will easily hurt the tire mouth. 2. Before tying the tire, use a shovel to shovel the tire mouth, and squeeze the tire rod as flat as possible, so that the shovel head and the steel ring have a gap of o.5 cm.Damage the device. 3. Before starting the tire-pulling operation, the motor should be electrically controlled to rotate the motor slightly in the opposite direction of the tire-pulling (the purpose is to make the tire mouth stretch and not to hurt the tire mouth), and then the tire-pulling operation will be performed. 4. The tire tying machine must not be exposed to rain or blisters, otherwise the motor is prone to circuit failure or burnout. 5. Remember! Before using the tire tying machine, the power supply must be installed with a leakage protector. Maintenance methods: 1. After using it a few times, be sure to check the tightening of each fixing screw.Each screw must be re-tightened. Regular inspections are required in the future to prevent the screws from loosening and damaging the device. 2. The tire picking device and tire mounting device should be cleaned regularly to prevent rust. 3. The motor and remote control system belong to electrical equipment, pay attention to moisture, and always check whether the environments wet. Prevent electrical equipment from being damaged by moisture. 4. The remote control is afraid of smashing, throwing, falling, or moisture, so pay attention to battery replacement to avoid affecting the use. 5. Maintenance of the machine head: after removing the inner connecting shaft, add grease into it and turn the machine to lubricate the gears. Item Included(239896): 16" 17.9-19.5" 22.5" truck tire changer electric portable tire changing machine 110V*1

Shoppers also compared

  • W
    WEIZE 2 HP Swing Arm Tire Changer with Double Assist Arms & Bead Blaster
    WEIZE 2 HP Swing Arm Tire Changer with Double Assist Arms & Bead Blaster
  • R
    Rotary R146 Swing Arm Electric Tire Changer
    Rotary R146 Swing Arm Electric Tire Changer
  • B
    BILT HARD 2 HP Swing Arm Tire Changer Wheel Changer
    BILT HARD 2 HP Swing Arm Tire Changer Wheel Changer
  • A
    Atlas TC229DAA Rim-Clamp Tire Changer
    Atlas TC229DAA Rim-Clamp Tire Changer
  • 2
    24" Rim Double Assist Arms Tire Changer Swing Arm Wheel Changer with Bead Blaster
    24" Rim Double Assist Arms Tire Changer Swing Arm Wheel Changer with Bead Blaster
  • F
    FBL900631 Electric Tire Changer for Sedans & Trucks with Pressure Gauge
    FBL900631 Electric Tire Changer for Sedans & Trucks with Pressure Gauge
  • C
    Corghi A9824TI Electric Tire Changer For Car and LT
    Corghi A9824TI Electric Tire Changer For Car and LT
  • T
    Tire Changer KT-T810 & Wheel Balancer KT-B700
    Tire Changer KT-T810 & Wheel Balancer KT-B700