The ZED-10FX is a compact multipurpose mixer with built-in effects for small-band live sound and for recording, live or in the studio. It has four mic/line inputs, two stereo inputs for MP3/CD players or keyboards, and configurable USB stereo audio in and out for capturing recordings on a PC or Mac.
Inputs 3 and 4 are high-impedance jack inputs that take a line-level signal or a low-level signal from a guitar pickup, so guitars can plug in directly. They use a Class A FET circuit powered from 48V, designed to give a tube-like gain stage. A Boost switch adds 26dB of gain for very low-level instruments.
The ZED-FX section has 16 time-delay and reverb effects, controlled with 3 buttons and 9 display LEDs. Delay time can be tapped in, and effect parameters such as the decay length on PLATE or the depth on CHORUS are adjusted by holding TAP and pressing the up/down buttons. The EQ is a 3-band design with a swept mid frequency and MusiQ, which sets the slope (Q factor) for equalizing individual instruments.
- Inputs
- 4 mic/line inputs (2 with Class A FET high-impedance inputs), 2 stereo inputs
- Input connectors
- Neutrik XLR mic inputs, Neutrik 1/4 inch jacks
- Mono XLR input
- -10 to -60dBu nominal (+11dBu maximum)
- Mono line input
- Jack socket, +10 to -40dBu (+31dBu maximum)
- Stereo input
- Jack or phono sockets, 0dBu nominal (control Off to +15dB)
- Main outputs
- XLR stereo L/R with inserts; Normal/DI out 0dBu/-30dBu, +21dBu/-9dBu maximum
- Aux & FX outputs
- Jack sockets, 0dBu nominal, +21dBu maximum
- Record & monitor outputs
- Phono sockets, 0dBu nominal, +21dBu maximum
- Recording
- Separate 2-track record outputs, stereo playback input for 2-track replay