This is a universal 12V electric oil transfer pump rated at 80W, sold with a 1.5 m inlet hose (10 mm inside diameter) and a 1.2 m outlet hose (6 mm inside diameter). It clamps to a car battery with red and black alligator clips and moves engine oil, crude oil or heating oil, so it suits DIY oil changes and small fluid transfers. It is a basic plastic-bodied pump with no reservoir, flow control or shutoff, so it is simpler and less controlled than a dedicated oil extractor with a built-in tank. Buyers should expect a slow, manual-style transfer and check hose fit against their dipstick tube or drain plug before relying on it.
In stockSold by neat jkisReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The 12V electric oil pump moves engine oil, crude oil and heating oil. It runs from a car battery through a red clamp for the positive terminal and a black clamp for the negative terminal. The body is plastic.
The outlet tube is 1.2 m long, with an outside diameter of 6 mm and an inside diameter of 6 mm. The oil tube is 1.5 m long, with an outside diameter of 12 mm and an inside diameter of 10 mm.
To use it, place the inlet and outlet hoses in position, connect the power clamps to the battery and press the button.
It checks today's price at every store, compares the alternatives and answers in about a minute.







