
4" IPS Capacitive Touch DSI Display for Raspberry Pi (800x480)
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 4-inch 800x480 IPS touchscreen that connects to a Raspberry Pi over the DSI ribbon cable instead of HDMI. Its capacitive panel supports 5-point touch, the glass is fully laminated and tempered, and the backlight is software-adjustable. Pogo pins tap 5V, GND, SCL and SDA from the GPIO header, so all GPIO pins stay free for a HAT or jumpers. It suits compact builds like handheld consoles, dashboards and camera rigs where a full-size monitor won't fit. Against HDMI touchscreens it wins on cable clutter and GPIO access but gives up resolution and screen size.
In stockShips from the UK · priced in GBP (£37.33) · duties may applyReturn policy
This is a 4" IPS touchscreen display for the Raspberry Pi, with an 800x480 resolution and a capacitive touch panel that supports up to 5-point touch, depending on the OS. The screen has a fully laminated tempered glass panel with hardness up to 6H and 170° viewing angles. The backlight can be adjusted in software.
The display is driven over the Raspberry Pi's DSI MIPI connection using the included ribbon cable, so no HDMI cable is needed and no GPIO pins are used. Power and the SDA/SCL lines are carried by pogo pins that connect to the underside of the Raspberry Pi GPIO header, which leaves every GPIO pin free for a HAT or jumper wires and lets the Pi be oriented away from the display.
A 2-pin 5V/GND header on the display can power low-voltage devices such as a 5V fan. The display is roughly 104mm x 65.5mm, with a viewable area of about 87mm x 52.5mm. The DIP switch is set according to the product wiki; on the Bullseye branch of Raspberry Pi OS, switch to I2C0.




