It checks today's price at every store, compares the alternatives and answers in about a minute.
The Festool ETS 125 REQ is a 5-inch one-handed random orbital sander built for finish work. Its 5/64-inch stroke is the finest in Festool's line, and the 250-watt motor runs 6,000 to 12,000 orbits per minute with stepless speed control. At 2.6 lbs it is easy to hold on vertical and overhead surfaces, and the Jetstream pad design pulls dust efficiently through the included longlife bag. The pad brake stops pad spin on set-down and lift-off to prevent gouges, and vibration-stop balancing keeps it smooth. It suits finishers and cabinetmakers who want a light, low-vibration sander for final passes; it is not a stock-removal tool, and its fine stroke makes it slower than coarser 3/32-inch or 1/8-inch sanders on heavy material. It ships in a Systainer³ with the pad, dust bag and edge protector.
In stockReturn policy
Owners rate it highly, praising the smooth finish, low vibration and light weight for vertical and overhead sanding. The main complaints are that it removes material slowly and that the dust bag needs emptying often.
The ETS 125 REQ is a random orbital sander with a 5" (125 mm) pad and a 250-watt motor. Its sanding stroke is 5/64", and the speed is steplessly variable from 6,000 to 12,000 OPM. It weighs 2.6 lbs and is compact enough to use with one hand.
The sander uses Festool's Jetstream design to remove dust, which keeps the air cleaner and extends the life of the abrasive and the pad. A sanding pad brake stops the pad from gouging the surface when the tool is set down or started up, and vibration-stop balancing reduces vibration during use.
It is suited to vertical surfaces and overhead work, including ceilings. The sander comes in a systainer³ storage container with a StickFix sanding pad, a Longlife dust bag, an edge protector and a Plug-it cord. Sanding discs are not included.