This is a complete hub and drum assembly for trailer axles rated 5,200 lb to 7,000 lb with a #42 spindle. It comes pre-greased and ready to install. It has an 8 on 6.5-inch bolt pattern with 9/16-inch wheel studs.
The kit includes bearings, pre-installed races, a grease seal, grease caps, a grease cap plug and coned lug nuts. It works with both grease-lube and E-Z Lube (zerk-lube) axle systems. It is designed for use with 12in x 2in electric or hydraulic drum brakes.
It is intended as a replacement for utility, equipment, cargo, livestock and flatbed trailers, and for brake repairs and axle rebuilds.
- Bolt pattern
- 8 on 6.5 in
- Wheel studs
- 9/16 in
- Axle rating
- 5,200 lb to 7,000 lb
- Spindle
- #42
- Brake size
- 12 in x 2 in, electric or hydraulic drum brakes
- Lube system
- Grease-lube and E-Z Lube (zerk-lube)
- Pre-greased
- Yes
- Inner bearing
- 25580, 1.750 in ID
- Outer bearing
- 14125A, 1.250 in ID
- Inner race
- 25520, 3.265 in OD, pre-installed
- Outer race
- 14276, 2.717 in OD, pre-installed
- Grease seal
- 10-36, 2.250 in x 3.376 in
- Grease caps
- 1 x 21-39 and 1 x 21-43-1, 2.720 in OD each
- Grease cap plug
- 1 x 85-1
- Wheel nuts
- 8 x 6-53 coned wheel nuts, 9/16 in
- In the box
- 1 hub and drum assembly, 1 inner bearing, 1 outer bearing, 1 inner race, 1 outer race, 1 grease seal, 2 grease caps, 1 grease cap plug, 8 coned wheel nuts